Direct Mount Stem
New direct mount stem is aimed to get you lower on your bike for an aggressive riding position and lower body position for cornering. Lets face it – not all of us are 6” tall. Everyone races a 8” fork for DH, but not all of us need the same bar height. Canfield Brothers stem lowers your bar a full inch (25.4mm) under a tradition direct mount which all run about an inch above the crown. C2 stem effectively places the center of the bar with the top of your upper crown.
If you can’t get low enough or just need a edge on the competition- this is the stem for you.
If you can’t get low enough or just need a edge on the competition- this is the stem for you.
Specification:
- Fully CNC machined from the highest quality aluminum (7075 aluminum alloy) for the best balance of strength, stiffness and light weight
- 31.8 Bar size with a 50mm extension
- Anodized and laser etched finish for a very durable finish.
- Wide, 52mm clamping width
- Light weight at 158 grams with hardware
- 1 piece face plate makes the stem stiffer and gives you a precise steering feel